Click to enlarge

Rotor SAT HH is a motor that enables any satellite dish to be pointed towards all visible satellites in the polar orbit. The characteristics that make Rotor SAT HH particularly valid are as follows:
-Maximum precision.
-Mechanical robustness.
-Connection without external feeding, only by coaxial cable.
-Reduced dimensions.
-Maximum ease of installation Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible receivers , where the rotation of the motor automatically begins when selecting the required channel. For all those receivers not provided with DiSEqC, STAB has developed the interfaces MS 220, MP 01, MP 02 to drive the motors only by Tv cable.

ROTOR SAT HH100 TECHNICAL DATA
Operating protocol: DiSEqCTM 1.2 Level
Maximum dish diameter: 100 cm
Maximum antenna weight: 12 Kg
Rotating pole lenght: 125 mm
Rotation speed: 1,8°/s(18V) 1,2°/s(13V)
Power supply: 13 / 18 Vdc
Consumption in stand-by mode: 30mA
Consumption in operating mode: 190mA
Maximum consumption: 350mA
External temperatures range: -40°C +80°C
Max relative humidity: 100%
Programmable positions: 49 satellites
Preset positions: 26 satellites
Connectors: F type
Connection: sat coaxial cable
East-West limits: software & hardware
Pos. fine tuning: autofocus/manual 0,1° impulse
Inclination: 55° max
H/H mount weight: 3 Kg