Click to enlarge

The Ether I/O 24 R is an UDP/IP controlled digital Input/Output module. The module features three 8-bit ports with 5V level signal lines. Each of the 24 lines can be independently programmed as either an input or output.

The module connects to any Ethernet network supporting the TCP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router the device can communicate with any Internet connected device.

Features
• Programmable port number
• Programmable subnet mask and gateway address
• SPI on PORT A (ability to send multiple bytes)
• New jumper for fixed IP address of 192.168.0.10
• LED built into the RJ45 connector with the option of placing the old led configuration
• Uses Internet Standard UDP/IP Protocol with simple command set.
• Industry standard 10BaseT Ethernet Interface by means of an integrated RJ-45 Connector.
• 24 independently programmable Input / Output Pins with configurable CMOS or TTL level thresholds.
• Easy connection by 0.1” pitch 10 way box headers to suit standard IDC connectors.
• Powered from an external 5V DC Power source or optionally from the onboard regulator from any 8-30V DC source..
• Dimensions 72mm x 72mm